Tile & Grout Repair & Regrouting
Fixing failing grout, loose tiles, and shower leaks in existing tilework
How much does tile and grout repair cost in Atlanta?
Spot tile repairs average around $470 in metro Atlanta, regrouting runs $5 to $8 per square foot, and regrouting a full shower costs $600 to $2,500. First Choice Tile replaces cracked and loose tile, cuts out failing grout, re-caulks the corners and color-seals, without demolishing the whole bathroom.
Grout and caulk are the first things to fail in an Atlanta bathroom or kitchen, long before the tile itself. We repair what you already have: cracked or loose tiles, hollow-sounding floors, stained or crumbling grout, and shower leaks that start at the caulk lines. Our crews cut out failing joints, reset movement-prone areas with the right flexible sealant, and regrout so the surface sheds water again instead of soaking your subfloor.
What We Offer
Full Regrouting
We grind out failing cement grout to a sound depth and re-lay new grout that bonds to the joint and seals.
Loose Tile Resets
Hollow or lifting tiles get pulled, re-set in fresh thinset over a properly bonded substrate, and grouted to match.
Shower Leak Repair
We trace leaks to their real source at grout and caulk lines and reseal changes of plane with flexible sealant.
Corner Re-Caulking
Inside corners, tub joints, and floor-to-wall transitions get proper caulk instead of rigid grout that keeps cracking.
Grout Color-Sealing
Color-sealing locks in one uniform shade and adds a stain-resistant barrier over blotchy or discolored cement grout.
Discontinued Tile Matching
We source or salvage close matches for cracked tiles when the original line is no longer manufactured.
Why Choose Us
Stops water reaching the subfloor
Cracked and chipped tiles replaced
Hollow, loose floor tiles re-set
Moldy grout cut out and renewed
Flexible caulk at every change of plane
Uniform grout color, sealed against stains
Fixes leaks without a full tear-out
Matches existing tile and grout lines
Existing shower and floor tile reused where sound
Repair scoped honestly against replacement
Serving homeowners across metro Atlanta
Our Process
- 1
On-Site Assessment
We sound out tiles, test suspect joints, and locate where water is actually getting in.
- 2
Repair vs. Replace
You get a straight recommendation on what can be repaired and what needs a larger fix.
- 3
Cut Out & Clean
Failing grout and caulk are ground out to a sound depth and every joint is vacuumed clean.
- 4
Reset Loose Tiles
Hollow or lifted tiles are re-bonded in fresh thinset and leveled into the surrounding field.
- 5
Regrout & Re-Caulk
New grout goes in the field joints; flexible sealant goes at corners and changes of plane.
- 6
Seal & Clean Up
We color-seal where needed, wipe down the haze, and leave the surface ready for water.
Frequently Asked Questions
Grout crumbling or a shower that won't stop leaking? Call (404) 747-8242.
Contact us today for a free consultation and quote
Book an Appointment
Schedule your free consultation today